flexiblefullpage - default
interstitial1 - interstitial
Currently Reading

Checking Your Client’s Chimneys? Look For These Common Damages

Advertisement
billboard -
Construction Practices

Checking Your Client’s Chimneys? Look For These Common Damages


By By Barbara Ballinger September 14, 2021
chimney fire
Chimney repair

Brick spalling, crumbling, moisture—these failures result from a lack of chimney maintenance. As fall approaches, remodelers must ensure their client’s home—and chimney—are ready for cooler weather.

Just as gutters and downspouts need to be cleared of debris to avoid ice dams, and windows and doors need caulking, chimneys also need inspection annually, according to the National Fire Protection Association and the Chimney Safety Institute of America (CSIA). 

 

The Chimney’s Worst Enemy: Water

Russ Dimmitt, CSIA’s director of education, says common chimney damages result from age, water, and installation methods.

“Some mortar from long ago used horsehair, and some may not last as long because of the weather in an area,” Dimmitt says. “There are at least half dozen ways to apply mortar in between brick, and some tend to collect more water than others.”

Crumbling bricks then require tuckpointing that will keep water out. Water damage can also impact other parts of the chimney, such as the flue, the lining in a masonry chimney designed to expel hot glue gases outside. The chimney crown or the wash, the top flat part of the chimney just below the cap, can also crack due to moisture.

 

chimney repair

Diagram: Courtesy Chimney Safety Institute of America

 

“In general, water is the biggest enemy of chimneys,” says Dimmitt. 

Proper flashing at the point where the chimney meets the roof is vital to keeping moisture away. Tommy Nelms of Sweeps and Ladders in Franklin, Tenn. notes that homeowners usually cannot detect this type of work, making it vital for professionals to check during inspections. 

Many prefer L-shaped step flashing, which can be made from different materials such as aluminum, steel, and copper, and lies under the roof shingles and along the brick of a masonry chimney, says Dimmitt.  

When water soaks into bricks and freezes, it expands. Then, when the weather warms, this cycle repeats itself and can cause an effect called “spalling.” The bricks then crumble and need replacing. There are products available to avoid spalling by establishing a barrier rather than sealing the brick and possibly sealing in moisture. “It’s like Gore-Tex clothing that lets moisture out but not in,” says Dimmitt.

Aside from moisture, general age will cause damage to chimneys and threaten the safety of homeowners.

For example, a wood-burning fireplace will cause creosote to form inside the chimney when smoke doesn’t escape entirely. Creosote buildup can start a chimney fire, which can spread to the rest of the house.

But any fireplace, even a gas-fired one, also needs an inspection, says Nelms. Besides being a certified Master Chimney Sweep, he also was a career firefighter. “I have seen what a lack of routine maintenance can cause to happen," he says.

Though older chimneys were constructed of masonry, it's often not the case anymore. Factory-built fireplaces are commonly made of metal and come as complete units with a firebox, chimney system, and miscellaneous parts, according to CSIA. Metal ones also need annual maintenance, says Nelms. 

The good news, he adds, is that newer chimneys have changed dramatically and are more efficient—both masonry and metal ones. 


written by

Barbara Ballinger

Barbara Ballinger, is a writer who focuses on real estate, design, and personal subjects. Her latest book is Not Dead Yet: Rebooting your life after 50.


Add new comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and email addresses turn into links automatically.
  • Lines and paragraphs break automatically.
leaderboard2 - default

Related Stories

6 Must-Knows for Installing Pocket Doors

Save your sanity: Do it right the first time

Crawl Spaces to Basements: Proceed with Caution

Converting a crawl space to other uses can upgrade a home and add significant value, but when done incorrectly, it can also be disastrous 

Webinar: Project and Trade Management Musts—The New American Remodel 2023

Access the webinar here to learn project and trade management lessons from The New American Remodel 2023

How to Attach a Patio Roof to an Existing House

A graceful integration may mean more work but improved functionality and aesthetics 

How To Improve Energy Performance in Existing Attics

There’s more to insulating the attic than attic insulation; there’s venting, air sealing, and misery

Model ReModel 2022: A Case Study in Sustainable, Thoughtful Construction

The eighth annual Model ReModel project features an accessory dwelling unit, designed for aging in place, attached to a 19th-century Victorian

Installing a Curbless Shower

Model ReModel 2022 features an ADA-compliant bathroom. The contractor shares the install process

How to Install PVC Bevel Siding Over Rainscreen

It’s a lot like installing wood bevel siding, except it won’t warp or rot. And it expands and contracts differently and for different reasons

Understanding How PVC Trim Moves

Anybody who’s used PVC in an exterior application knows that it moves seasonally. Just like wood, right? Not exactly

Step-by-Step Install of a High-Performance Cathedral Ceiling

See how Model ReModel 2022 constructed its vaulted ceiling

Advertisement
boombox2 -
Advertisement
halfpage2 -
Advertisement
native1 -

More in Category




Advertisement
native2 -
Advertisement
halfpage1 -
Advertisement
leaderboard1 -